From 153e48111b97d15e784b1ef2ec44c7451905535b Mon Sep 17 00:00:00 2001 From: aristote Date: Wed, 29 May 2024 19:27:53 +0200 Subject: switch to use as home laptop --- home/spacemacs.el | 653 ------------------------------------------------------ 1 file changed, 653 deletions(-) delete mode 100644 home/spacemacs.el (limited to 'home/spacemacs.el') diff --git a/home/spacemacs.el b/home/spacemacs.el deleted file mode 100644 index a88630c..0000000 --- a/home/spacemacs.el +++ /dev/null @@ -1,653 +0,0 @@ -;; -*- mode: emacs-lisp; lexical-binding: t -*- -;; This file is loaded by Spacemacs at startup. -;; It must be stored in your home directory. - -(defun dotspacemacs/layers () - "Layer configuration: -This function should only modify configuration layer settings." - (setq-default - ;; Base distribution to use. This is a layer contained in the directory - ;; `+distribution'. For now available distributions are `spacemacs-base' - ;; or `spacemacs'. (default 'spacemacs) - dotspacemacs-distribution 'spacemacs - - ;; Lazy installation of layers (i.e. layers are installed only when a file - ;; with a supported type is opened). Possible values are `all', `unused' - ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers - ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will - ;; lazy install any layer that support lazy installation even the layers - ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy - ;; installation feature and you have to explicitly list a layer in the - ;; variable `dotspacemacs-configuration-layers' to install it. - ;; (default 'unused) - dotspacemacs-enable-lazy-installation 'unused - - ;; If non-nil then Spacemacs will ask for confirmation before installing - ;; a layer lazily. (default t) - dotspacemacs-ask-for-lazy-installation t - - ;; List of additional paths where to look for configuration layers. - ;; Paths must have a trailing slash (i.e. `~/.mycontribs/') - dotspacemacs-configuration-layer-path '() - - ;; List of configuration layers to load. - dotspacemacs-configuration-layers - '( - ;; ---------------------------------------------------------------- - ;; Example of useful layers you may want to use right away. - ;; Uncomment some layer names and press `SPC f e R' (Vim style) or - ;; `M-m f e R' (Emacs style) to install them. - ;; ---------------------------------------------------------------- - auto-completion - better-defaults - ;; eww - git - helm - multiple-cursors - ;; (shell :variables - ;; shell-default-height 30 - ;; shell-default-position 'bottom) - ;; spell-checking - ;; syntax-checking - version-control - treemacs - ;; ---------------------------------------------------------------- - ;; Programming (and markup) languages - ;; ---------------------------------------------------------------- - lsp - emacs-lisp spacemacs-misc - html javascript - latex - markdown - nixos - (org :variables - org-enable-roam-support t - org-enable-roam-ui t - ) - ocaml coq - yaml - ;; ---------------------------------------------------------------- - ;; Private layers - ;; ---------------------------------------------------------------- - direnv - ) - - ;; List of additional packages that will be installed without being wrapped - ;; in a layer (generally the packages are installed only and should still be - ;; loaded using load/require/use-package in the user-config section below in - ;; this file). If you need some configuration for these packages, then - ;; consider creating a layer. You can also put the configuration in - ;; `dotspacemacs/user-config'. To use a local version of a package, use the - ;; `:location' property: '(your-package :location "~/path/to/your-package/") - ;; Also include the dependencies as they will not be resolved automatically. - dotspacemacs-additional-packages '(request-deferred parse-csv) - - ;; A list of packages that cannot be updated. - dotspacemacs-frozen-packages '() - - ;; A list of packages that will not be installed and loaded. - dotspacemacs-excluded-packages '() - - ;; Defines the behaviour of Spacemacs when installing packages. - ;; Possible values are `used-only', `used-but-keep-unused' and `all'. - ;; `used-only' installs only explicitly used packages and deletes any unused - ;; packages as well as their unused dependencies. `used-but-keep-unused' - ;; installs only the used packages but won't delete unused ones. `all' - ;; installs *all* packages supported by Spacemacs and never uninstalls them. - ;; (default is `used-only') - dotspacemacs-install-packages 'used-but-keep-unused)) - -(defun dotspacemacs/init () - "Initialization: -This function is called at the very beginning of Spacemacs startup, -before layer configuration. -It should only modify the values of Spacemacs settings." - ;; This setq-default sexp is an exhaustive list of all the supported - ;; spacemacs settings. - (setq-default - ;; If non-nil then enable support for the portable dumper. You'll need to - ;; compile Emacs 27 from source following the instructions in file - ;; EXPERIMENTAL.org at to root of the git repository. - ;; - ;; WARNING: pdumper does not work with Native Compilation, so it's disabled - ;; regardless of the following setting when native compilation is in effect. - ;; - ;; (default nil) - dotspacemacs-enable-emacs-pdumper nil - - ;; Name of executable file pointing to emacs 27+. This executable must be - ;; in your PATH. - ;; (default "emacs") - dotspacemacs-emacs-pdumper-executable-file "emacs" - - ;; Name of the Spacemacs dump file. This is the file will be created by the - ;; portable dumper in the cache directory under dumps sub-directory. - ;; To load it when starting Emacs add the parameter `--dump-file' - ;; when invoking Emacs 27.1 executable on the command line, for instance: - ;; ./emacs --dump-file=$HOME/.emacs.d/.cache/dumps/spacemacs-27.1.pdmp - ;; (default (format "spacemacs-%s.pdmp" emacs-version)) - dotspacemacs-emacs-dumper-dump-file (format "spacemacs-%s.pdmp" emacs-version) - - ;; If non-nil ELPA repositories are contacted via HTTPS whenever it's - ;; possible. Set it to nil if you have no way to use HTTPS in your - ;; environment, otherwise it is strongly recommended to let it set to t. - ;; This variable has no effect if Emacs is launched with the parameter - ;; `--insecure' which forces the value of this variable to nil. - ;; (default t) - dotspacemacs-elpa-https t - - ;; Maximum allowed time in seconds to contact an ELPA repository. - ;; (default 5) - dotspacemacs-elpa-timeout 5 - - ;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes. - ;; This is an advanced option and should not be changed unless you suspect - ;; performance issues due to garbage collection operations. - ;; (default '(100000000 0.1)) - dotspacemacs-gc-cons '(100000000 0.1) - - ;; Set `read-process-output-max' when startup finishes. - ;; This defines how much data is read from a foreign process. - ;; Setting this >= 1 MB should increase performance for lsp servers - ;; in emacs 27. - ;; (default (* 1024 1024)) - dotspacemacs-read-process-output-max (* 1024 1024) - - ;; If non-nil then Spacelpa repository is the primary source to install - ;; a locked version of packages. If nil then Spacemacs will install the - ;; latest version of packages from MELPA. Spacelpa is currently in - ;; experimental state please use only for testing purposes. - ;; (default nil) - dotspacemacs-use-spacelpa nil - - ;; If non-nil then verify the signature for downloaded Spacelpa archives. - ;; (default t) - dotspacemacs-verify-spacelpa-archives t - - ;; If non-nil then spacemacs will check for updates at startup - ;; when the current branch is not `develop'. Note that checking for - ;; new versions works via git commands, thus it calls GitHub services - ;; whenever you start Emacs. (default nil) - dotspacemacs-check-for-update nil - - ;; If non-nil, a form that evaluates to a package directory. For example, to - ;; use different package directories for different Emacs versions, set this - ;; to `emacs-version'. (default 'emacs-version) - dotspacemacs-elpa-subdirectory 'emacs-version - - ;; One of `vim', `emacs' or `hybrid'. - ;; `hybrid' is like `vim' except that `insert state' is replaced by the - ;; `hybrid state' with `emacs' key bindings. The value can also be a list - ;; with `:variables' keyword (similar to layers). Check the editing styles - ;; section of the documentation for details on available variables. - ;; (default 'vim) - dotspacemacs-editing-style 'vim - - ;; If non-nil show the version string in the Spacemacs buffer. It will - ;; appear as (spacemacs version)@(emacs version) - ;; (default t) - dotspacemacs-startup-buffer-show-version t - - ;; Specify the startup banner. Default value is `official', it displays - ;; the official spacemacs logo. An integer value is the index of text - ;; banner, `random' chooses a random text banner in `core/banners' - ;; directory. A string value must be a path to an image format supported - ;; by your Emacs build. - ;; If the value is nil then no banner is displayed. (default 'official) - dotspacemacs-startup-banner 'official - - ;; Scale factor controls the scaling (size) of the startup banner. Default - ;; value is `auto' for scaling the logo automatically to fit all buffer - ;; contents, to a maximum of the full image height and a minimum of 3 line - ;; heights. If set to a number (int or float) it is used as a constant - ;; scaling factor for the default logo size. - dotspacemacs-startup-banner-scale 'auto - - ;; List of items to show in startup buffer or an association list of - ;; the form `(list-type . list-size)`. If nil then it is disabled. - ;; Possible values for list-type are: - ;; `recents' `recents-by-project' `bookmarks' `projects' `agenda' `todos'. - ;; List sizes may be nil, in which case - ;; `spacemacs-buffer-startup-lists-length' takes effect. - ;; The exceptional case is `recents-by-project', where list-type must be a - ;; pair of numbers, e.g. `(recents-by-project . (7 . 5))', where the first - ;; number is the project limit and the second the limit on the recent files - ;; within a project. - dotspacemacs-startup-lists '((recents . 5) - (projects . 7)) - - ;; True if the home buffer should respond to resize events. (default t) - dotspacemacs-startup-buffer-responsive t - - ;; Show numbers before the startup list lines. (default t) - dotspacemacs-show-startup-list-numbers t - - ;; The minimum delay in seconds between number key presses. (default 0.4) - dotspacemacs-startup-buffer-multi-digit-delay 0.4 - - ;; If non-nil, show file icons for entries and headings on Spacemacs home buffer. - ;; This has no effect in terminal or if "all-the-icons" package or the font - ;; is not installed. (default nil) - dotspacemacs-startup-buffer-show-icons nil - - ;; Default major mode for a new empty buffer. Possible values are mode - ;; names such as `text-mode'; and `nil' to use Fundamental mode. - ;; (default `text-mode') - dotspacemacs-new-empty-buffer-major-mode 'text-mode - - ;; Default major mode of the scratch buffer (default `text-mode') - dotspacemacs-scratch-mode 'text-mode - - ;; If non-nil, *scratch* buffer will be persistent. Things you write down in - ;; *scratch* buffer will be saved and restored automatically. - dotspacemacs-scratch-buffer-persistent nil - - ;; If non-nil, `kill-buffer' on *scratch* buffer - ;; will bury it instead of killing. - dotspacemacs-scratch-buffer-unkillable nil - - ;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!" - ;; (default nil) - dotspacemacs-initial-scratch-message nil - - ;; List of themes, the first of the list is loaded when spacemacs starts. - ;; Press `SPC T n' to cycle to the next theme in the list (works great - ;; with 2 themes variants, one dark and one light) - dotspacemacs-themes '(base16-stylix - spacemacs-light) - - ;; Set the theme for the Spaceline. Supported themes are `spacemacs', - ;; `all-the-icons', `custom', `doom', `vim-powerline' and `vanilla'. The - ;; first three are spaceline themes. `doom' is the doom-emacs mode-line. - ;; `vanilla' is default Emacs mode-line. `custom' is a user defined themes, - ;; refer to the DOCUMENTATION.org for more info on how to create your own - ;; spaceline theme. Value can be a symbol or list with additional properties. - ;; (default '(spacemacs :separator wave :separator-scale 1.5)) - dotspacemacs-mode-line-theme '(spacemacs :separator wave :separator-scale 1.5) - - ;; If non-nil the cursor color matches the state color in GUI Emacs. - ;; (default t) - dotspacemacs-colorize-cursor-according-to-state t - - ;; Default font or prioritized list of fonts. The `:size' can be specified as - ;; a non-negative integer (pixel size), or a floating-point (point size). - ;; Point size is recommended, because it's device independent. (default 10.0) - dotspacemacs-default-font '("DejaVu Sans Mono" - :size 12.0 - :weight normal - :width normal) - - ;; The leader key (default "SPC") - dotspacemacs-leader-key "SPC" - - ;; The key used for Emacs commands `M-x' (after pressing on the leader key). - ;; (default "SPC") - dotspacemacs-emacs-command-key "SPC" - - ;; The key used for Vim Ex commands (default ":") - dotspacemacs-ex-command-key ":" - - ;; The leader key accessible in `emacs state' and `insert state' - ;; (default "M-m") - dotspacemacs-emacs-leader-key "M-m" - - ;; Major mode leader key is a shortcut key which is the equivalent of - ;; pressing ` m`. Set it to `nil` to disable it. (default ",") - dotspacemacs-major-mode-leader-key "," - - ;; Major mode leader key accessible in `emacs state' and `insert state'. - ;; (default "C-M-m" for terminal mode, "" for GUI mode). - ;; Thus M-RET should work as leader key in both GUI and terminal modes. - ;; C-M-m also should work in terminal mode, but not in GUI mode. - dotspacemacs-major-mode-emacs-leader-key (if window-system "" "C-M-m") - - ;; These variables control whether separate commands are bound in the GUI to - ;; the key pairs `C-i', `TAB' and `C-m', `RET'. - ;; Setting it to a non-nil value, allows for separate commands under `C-i' - ;; and TAB or `C-m' and `RET'. - ;; In the terminal, these pairs are generally indistinguishable, so this only - ;; works in the GUI. (default nil) - dotspacemacs-distinguish-gui-tab nil - - ;; Name of the default layout (default "Default") - dotspacemacs-default-layout-name "Default" - - ;; If non-nil the default layout name is displayed in the mode-line. - ;; (default nil) - dotspacemacs-display-default-layout nil - - ;; If non-nil then the last auto saved layouts are resumed automatically upon - ;; start. (default nil) - dotspacemacs-auto-resume-layouts nil - - ;; If non-nil, auto-generate layout name when creating new layouts. Only has - ;; effect when using the "jump to layout by number" commands. (default nil) - dotspacemacs-auto-generate-layout-names nil - - ;; Size (in MB) above which spacemacs will prompt to open the large file - ;; literally to avoid performance issues. Opening a file literally means that - ;; no major mode or minor modes are active. (default is 1) - dotspacemacs-large-file-size 1 - - ;; Location where to auto-save files. Possible values are `original' to - ;; auto-save the file in-place, `cache' to auto-save the file to another - ;; file stored in the cache directory and `nil' to disable auto-saving. - ;; (default 'cache) - dotspacemacs-auto-save-file-location 'cache - - ;; Maximum number of rollback slots to keep in the cache. (default 5) - dotspacemacs-max-rollback-slots 5 - - ;; If non-nil, the paste transient-state is enabled. While enabled, after you - ;; paste something, pressing `C-j' and `C-k' several times cycles through the - ;; elements in the `kill-ring'. (default nil) - dotspacemacs-enable-paste-transient-state nil - - ;; Which-key delay in seconds. The which-key buffer is the popup listing - ;; the commands bound to the current keystroke sequence. (default 0.4) - dotspacemacs-which-key-delay 0.4 - - ;; Which-key frame position. Possible values are `right', `bottom' and - ;; `right-then-bottom'. right-then-bottom tries to display the frame to the - ;; right; if there is insufficient space it displays it at the bottom. - ;; (default 'bottom) - dotspacemacs-which-key-position 'bottom - - ;; Control where `switch-to-buffer' displays the buffer. If nil, - ;; `switch-to-buffer' displays the buffer in the current window even if - ;; another same-purpose window is available. If non-nil, `switch-to-buffer' - ;; displays the buffer in a same-purpose window even if the buffer can be - ;; displayed in the current window. (default nil) - dotspacemacs-switch-to-buffer-prefers-purpose nil - - ;; If non-nil a progress bar is displayed when spacemacs is loading. This - ;; may increase the boot time on some systems and emacs builds, set it to - ;; nil to boost the loading time. (default t) - dotspacemacs-loading-progress-bar t - - ;; If non-nil the frame is fullscreen when Emacs starts up. (default nil) - ;; (Emacs 24.4+ only) - dotspacemacs-fullscreen-at-startup nil - - ;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen. - ;; Use to disable fullscreen animations in OSX. (default nil) - dotspacemacs-fullscreen-use-non-native nil - - ;; If non-nil the frame is maximized when Emacs starts up. - ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil. - ;; (default nil) (Emacs 24.4+ only) - dotspacemacs-maximized-at-startup nil - - ;; If non-nil the frame is undecorated when Emacs starts up. Combine this - ;; variable with `dotspacemacs-maximized-at-startup' to obtain fullscreen - ;; without external boxes. Also disables the internal border. (default nil) - dotspacemacs-undecorated-at-startup nil - - ;; A value from the range (0..100), in increasing opacity, which describes - ;; the transparency level of a frame when it's active or selected. - ;; Transparency can be toggled through `toggle-transparency'. (default 90) - dotspacemacs-active-transparency 90 - - ;; A value from the range (0..100), in increasing opacity, which describes - ;; the transparency level of a frame when it's inactive or deselected. - ;; Transparency can be toggled through `toggle-transparency'. (default 90) - dotspacemacs-inactive-transparency 90 - - ;; A value from the range (0..100), in increasing opacity, which describes the - ;; transparency level of a frame background when it's active or selected. Transparency - ;; can be toggled through `toggle-background-transparency'. (default 90) - dotspacemacs-background-transparency 90 - - ;; If non-nil show the titles of transient states. (default t) - dotspacemacs-show-transient-state-title t - - ;; If non-nil show the color guide hint for transient state keys. (default t) - dotspacemacs-show-transient-state-color-guide t - - ;; If non-nil unicode symbols are displayed in the mode line. - ;; If you use Emacs as a daemon and wants unicode characters only in GUI set - ;; the value to quoted `display-graphic-p'. (default t) - dotspacemacs-mode-line-unicode-symbols t - - ;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth - ;; scrolling overrides the default behavior of Emacs which recenters point - ;; when it reaches the top or bottom of the screen. (default t) - dotspacemacs-smooth-scrolling t - - ;; Show the scroll bar while scrolling. The auto hide time can be configured - ;; by setting this variable to a number. (default t) - dotspacemacs-scroll-bar-while-scrolling t - - ;; Control line numbers activation. - ;; If set to `t', `relative' or `visual' then line numbers are enabled in all - ;; `prog-mode' and `text-mode' derivatives. If set to `relative', line - ;; numbers are relative. If set to `visual', line numbers are also relative, - ;; but only visual lines are counted. For example, folded lines will not be - ;; counted and wrapped lines are counted as multiple lines. - ;; This variable can also be set to a property list for finer control: - ;; '(:relative nil - ;; :visual nil - ;; :disabled-for-modes dired-mode - ;; doc-view-mode - ;; markdown-mode - ;; org-mode - ;; pdf-view-mode - ;; text-mode - ;; :size-limit-kb 1000) - ;; When used in a plist, `visual' takes precedence over `relative'. - ;; (default nil) - dotspacemacs-line-numbers nil - - ;; Code folding method. Possible values are `evil', `origami' and `vimish'. - ;; (default 'evil) - dotspacemacs-folding-method 'evil - - ;; If non-nil and `dotspacemacs-activate-smartparens-mode' is also non-nil, - ;; `smartparens-strict-mode' will be enabled in programming modes. - ;; (default nil) - dotspacemacs-smartparens-strict-mode nil - - ;; If non-nil smartparens-mode will be enabled in programming modes. - ;; (default t) - dotspacemacs-activate-smartparens-mode t - - ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes - ;; over any automatically added closing parenthesis, bracket, quote, etc... - ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil) - dotspacemacs-smart-closing-parenthesis nil - - ;; Select a scope to highlight delimiters. Possible values are `any', - ;; `current', `all' or `nil'. Default is `all' (highlight any scope and - ;; emphasis the current one). (default 'all) - dotspacemacs-highlight-delimiters 'all - - ;; If non-nil, start an Emacs server if one is not already running. - ;; (default nil) - dotspacemacs-enable-server nil - - ;; Set the emacs server socket location. - ;; If nil, uses whatever the Emacs default is, otherwise a directory path - ;; like \"~/.emacs.d/server\". It has no effect if - ;; `dotspacemacs-enable-server' is nil. - ;; (default nil) - dotspacemacs-server-socket-dir nil - - ;; If non-nil, advise quit functions to keep server open when quitting. - ;; (default nil) - dotspacemacs-persistent-server nil - - ;; List of search tool executable names. Spacemacs uses the first installed - ;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'. - ;; (default '("rg" "ag" "pt" "ack" "grep")) - dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep") - - ;; Format specification for setting the frame title. - ;; %a - the `abbreviated-file-name', or `buffer-name' - ;; %t - `projectile-project-name' - ;; %I - `invocation-name' - ;; %S - `system-name' - ;; %U - contents of $USER - ;; %b - buffer name - ;; %f - visited file name - ;; %F - frame name - ;; %s - process status - ;; %p - percent of buffer above top of window, or Top, Bot or All - ;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All - ;; %m - mode name - ;; %n - Narrow if appropriate - ;; %z - mnemonics of buffer, terminal, and keyboard coding systems - ;; %Z - like %z, but including the end-of-line format - ;; If nil then Spacemacs uses default `frame-title-format' to avoid - ;; performance issues, instead of calculating the frame title by - ;; `spacemacs/title-prepare' all the time. - ;; (default "%I@%S") - dotspacemacs-frame-title-format "%I@%S" - - ;; Format specification for setting the icon title format - ;; (default nil - same as frame-title-format) - dotspacemacs-icon-title-format nil - - ;; Color highlight trailing whitespace in all prog-mode and text-mode derived - ;; modes such as c++-mode, python-mode, emacs-lisp, html-mode, rst-mode etc. - ;; (default t) - dotspacemacs-show-trailing-whitespace t - - ;; Delete whitespace while saving buffer. Possible values are `all' - ;; to aggressively delete empty line and long sequences of whitespace, - ;; `trailing' to delete only the whitespace at end of lines, `changed' to - ;; delete only whitespace for changed lines or `nil' to disable cleanup. - ;; (default nil) - dotspacemacs-whitespace-cleanup nil - - ;; If non-nil activate `clean-aindent-mode' which tries to correct - ;; virtual indentation of simple modes. This can interfere with mode specific - ;; indent handling like has been reported for `go-mode'. - ;; If it does deactivate it here. - ;; (default t) - dotspacemacs-use-clean-aindent-mode t - - ;; Accept SPC as y for prompts if non-nil. (default nil) - dotspacemacs-use-SPC-as-y nil - - ;; If non-nil shift your number row to match the entered keyboard layout - ;; (only in insert state). Currently supported keyboard layouts are: - ;; `qwerty-us', `qwertz-de' and `querty-ca-fr'. - ;; New layouts can be added in `spacemacs-editing' layer. - ;; (default nil) - dotspacemacs-swap-number-row nil - - ;; Either nil or a number of seconds. If non-nil zone out after the specified - ;; number of seconds. (default nil) - dotspacemacs-zone-out-when-idle nil - - ;; Run `spacemacs/prettify-org-buffer' when - ;; visiting README.org files of Spacemacs. - ;; (default nil) - dotspacemacs-pretty-docs nil - - ;; If nil the home buffer shows the full path of agenda items - ;; and todos. If non-nil only the file name is shown. - dotspacemacs-home-shorten-agenda-source nil - - ;; If non-nil then byte-compile some of Spacemacs files. - dotspacemacs-byte-compile nil)) - -(defun dotspacemacs/user-env () - "Environment variables setup. -This function defines the environment variables for your Emacs session. By -default it calls `spacemacs/load-spacemacs-env' which loads the environment -variables declared in `~/.spacemacs.env' or `~/.spacemacs.d/.spacemacs.env'. -See the header of this file for more information." - (spacemacs/load-spacemacs-env) -) - -(defun dotspacemacs/user-init () - "Initialization for user code: -This function is called immediately after `dotspacemacs/init', before layer -configuration. -It is mostly for variables that should be set before packages are loaded. -If you are unsure, try setting them in `dotspacemacs/user-config' first." -) - - -(defun dotspacemacs/user-load () - "Library to load while dumping. -This function is called only while dumping Spacemacs configuration. You can -`require' or `load' the libraries of your choice that will be included in the -dump." -) - - -(defun dotspacemacs/user-config () - "Configuration for user code: -This function is called at the very end of Spacemacs startup, after layer -configuration. -Put your configuration code here, except for variables that should be set -before packages are loaded." - ;; Variables customization - (custom-set-variables - ;; tuareg - '(merlin-command "ocamlmerlin") - - ;; reftex - ;; https://tex.stackexchange.com/a/54825 - '(reftex-bibliography-commands '("bibliography" - "nobibliography" - "addbibresource")) - - ;; compiling packages - ;; don't pop warning buffer on native comp - '(native-comp-async-report-warnings-errors 'silent) - - ;; restrict which warnings are shown - '(warning-minimum-level :emergency) - - ;; org-roam - '(org-roam-directory (file-truename "~/documents/notes/src")) - - ;; don't overflow text horizontally - '(truncate-lines nil) - ) - - ;; auto-completion - (global-company-mode t) - - ;; hooks - (add-hook 'LaTeX-mode-hook 'outline-minor-mode) - (org-roam-db-autosync-mode) - - ;; Key bindings - (defun my-ediff-dotfile-and-template () - (interactive) - (ediff-files "~/code/nix/machines/latitude-7280/home/spacemacs.el" - (concat dotspacemacs-template-directory ".spacemacs.template"))) - (spacemacs/set-leader-keys "feD" 'my-ediff-dotfile-and-template) - (defun my-open-dotfile () - (interactive) - (find-file "~/code/nix/machines/latitude-7280/home/spacemacs.el")) - (spacemacs/set-leader-keys "fed" 'my-open-dotfile) - - (spacemacs/set-leader-keys-for-major-mode 'magit-mode "b" 'magit-branch) -) - -;; Do not write anything past this comment. This is where Emacs will -;; auto-generate custom variable definitions. -(defun dotspacemacs/emacs-custom-settings () - "Emacs custom settings. -This is an auto-generated function, do not modify its content directly, use -Emacs customize menu instead. -This function is called at the very end of Spacemacs initialization." -(custom-set-variables - ;; custom-set-variables was added by Custom. - ;; If you edit it by hand, you could mess it up, so be careful. - ;; Your init file should contain only one such instance. - ;; If there is more than one, they won't work right. - '(package-selected-packages - '(yapfify utop tuareg caml sphinx-doc pytest pyenv-mode py-isort poetry pippel pipenv pyvenv pip-requirements ocp-indent ocamlformat merlin-eldoc live-py-mode importmagic epc ctable concurrent deferred helm-pydoc flycheck-ocaml merlin dune cython-mode company-reftex company-math math-symbol-lists company-auctex company-anaconda blacken auctex anaconda-mode pythonic yasnippet-snippets unfill treemacs-magit smeargle orgit-forge orgit org-rich-yank org-projectile org-category-capture org-present org-pomodoro alert log4e gntp org-mime org-download org-cliplink org-brain nix-mode mwim mmm-mode markdown-toc magit-svn magit-section magit-gitflow magit-popup htmlize helm-org-rifle helm-nixos-options helm-gitignore helm-git-grep helm-company helm-c-yasnippet gnuplot gitignore-templates gitignore-mode gitconfig-mode gitattributes-mode git-timemachine git-messenger git-link git-gutter-fringe+ fringe-helper git-gutter+ gh-md fuzzy forge markdown-mode magit ghub closql emacsql-sqlite emacsql treepy git-commit with-editor transient flyspell-correct-helm flyspell-correct flycheck-pos-tip pos-tip evil-org company-nixos-options nixos-options company browse-at-remote auto-yasnippet yasnippet auto-dictionary ac-ispell auto-complete ws-butler writeroom-mode visual-fill-column winum volatile-highlights vi-tilde-fringe uuidgen undo-tree treemacs-projectile treemacs-persp treemacs-icons-dired treemacs-evil treemacs cfrs ht pfuture posframe toc-org symon symbol-overlay string-inflection string-edit spaceline-all-the-icons memoize all-the-icons spaceline powerline restart-emacs request rainbow-delimiters popwin persp-mode password-generator paradox spinner overseer org-superstar open-junk-file nameless multi-line shut-up macrostep lorem-ipsum link-hint indent-guide hungry-delete hl-todo highlight-parentheses highlight-numbers parent-mode highlight-indentation helm-xref helm-themes helm-swoop helm-purpose window-purpose imenu-list helm-projectile helm-org helm-mode-manager helm-make helm-ls-git helm-flx helm-descbinds helm-ag google-translate golden-ratio flycheck-package package-lint flycheck flycheck-elsa flx-ido flx fancy-battery eyebrowse expand-region evil-visualstar evil-visual-mark-mode evil-unimpaired f evil-tutor evil-textobj-line evil-surround evil-numbers evil-nerd-commenter evil-mc evil-matchit evil-lisp-state evil-lion evil-indent-plus evil-iedit-state evil-goggles evil-exchange evil-escape evil-ediff evil-easymotion evil-collection annalist evil-cleverparens smartparens evil-args evil-anzu anzu eval-sexp-fu emr iedit clang-format projectile paredit list-utils pkg-info epl elisp-slime-nav editorconfig dumb-jump s drag-stuff dired-quick-sort devdocs define-word dash column-enforce-mode clean-aindent-mode centered-cursor-mode auto-highlight-symbol auto-compile packed aggressive-indent ace-window ace-link ace-jump-helm-line helm avy helm-core popup which-key use-package pcre2el org-plus-contrib hydra lv hybrid-mode font-lock+ evil goto-chg dotenv-mode diminish bind-map bind-key async))) -(custom-set-faces - ;; custom-set-faces was added by Custom. - ;; If you edit it by hand, you could mess it up, so be careful. - ;; Your init file should contain only one such instance. - ;; If there is more than one, they won't work right. - ) -) -- cgit v1.2.3